Filter
Top Products
Copying Using Memory (continued)
3-27
To Set Next Copying Job (Reserve)
The Reserve function allows you to set up a new job while a current job is in progress.
When the current job is finished, the Reserve job starts printing immediately.
>>>Specifications for Reserve<<<
❒ Job settings: Max. 5 (current job plus 4 reserve jobs)
❒ When the current job is in Store mode, Image Insert, or Book Copy, the reserve job
setting will be available after the copier starts to print the current job.
❒ Incompatible Conditions: Interrupt copying, Scanning in Store mode, Proof copy
1. Press [START] to start scanning/printing for the current job.
RESERVE
will become active to show that the reserve job setting is now available
.
2. Touch RESERVE to highlight it.
The Reserve Job Setting Screen will be displayed.
On the Reserve Job Setting Screen, all keys on the LCD and control panel will
function for the reserve job.
3. Select copy conditions for the reserve job, as desired.
HINT
When trouble occurs while setting the reserve job, the SETTING key on
the Basic Screen will change to JAM or ADD PAPER key. See p. 5-7 to p.
5-9.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode