Konica Minolta 7130 Printer User Manual


 
[4] E.C.M. (Electronic Copy Monitor) (continued)
11-23
3 To add the ECM data, touch ADD. The ECM Data Input Screen with invalid Clear key
will be displayed. To input the ECM data, see p. 11-20 to p. 11-21.
4 To edit the ECM data, touch the c Upper arrow
or d Lower arrow key on the right in the ECM
Data List Screen to highlight the ECM data to be
edited, then touch EDIT. The ECM Data Edit
Screen with valid Clear key will be displayed.
(1) To edit the ECM password, touch Password.
Enter a new 5-digit ECM password using the
keypad on the control panel. Do not enter
“00000”.
(2) To edit the name, touch Name. The Name
Input Screen will be displayed. See p. 11-21.
(3) To edit the copy limit, touch Limit. Enter a
new 6-digit copy limit using the keypad on the control panel. Entering “000000”
signifies no copy limit.
(4) To clear the copy count, touch Clear.
5 Touch OK on the ECM Data Input Screen or the ECM Data Edit Screen to complete
the settings and return to the ECM Data List Screen.
To cancel the changes made in step 3 or 4, touch RETURN to restore the ECM Data
List Screen.
6 Touch RETURN on the ECM Data List Screen to restore the ECM Setting Menu
Screen. If other ECM setting changes are required, touch the desired key.
7 Touch RETURN to restore the Key Operator Mode Screen.
8 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
11
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Data
Panel Contrast
Paper Type
Lock Job
Memory
E.C.M.
Preset Key
Copier Initial
System Initial
Key Operator
Mode