Konica Minolta 7130 Printer User Manual


 
11-40
[10] Touch Panel Adjustment
Use this feature to check malfunctions of the LCD touch screen due to the shift in
position of the touch sensor.
When the Control Panel Adjustment Screen does not display in step 2, press one from the
control panel keypad [0] ~ [9].
Key Operator Mode Screen Touch Panel Adjustment Screen
Procedure
1 Touch [10] Touch panel adj. on the Key Operator Mode Screen to display the Touch
Panel Adjustment Screen.
2 Touch the “+” indication at the upper right corner, then lower left corner on the screen.
The present coordinates will be displayed in the message area of the screen.
NOTE:
When touching the “+” indications, it is recommended that you use a sharp
point such as a pencil to be more accurate.
3 Check that the X coordinate and Y coordinate displayed in the first line of the message
area fall within the standard value displayed in the second line.
4 Touch the CHECKs at the upper left and lower right corners on the screen to check if
the buzzer tone functions normally.
5 If the coordinates fall out of the range of the standard value in step 3, or the buzzer
tone does not sound in step 4, repeat the adjustment procedure from 2 to 4.
6 Press [START] on the control panel to complete the setting.