Filter
Top Products
Making Double-Sided Copies (1a2, 2a2) (continued)
3-19
2. Select additional copy conditions, as desired.
DETAILS
Some incompatible conditions may automatically release the selected
copy mode. In this case, arrange the settings so that they are compatible
with the selected copy mode.
3. Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-7 for details on setting print quantity.
4. Position originals FACE UP in the document feeder.
HINTS
• See p. 3-2 to p. 3-4 for details on positioning originals.
• Use RADF store mode (p. 3-24 to p. 3-26) when the original count
exceeds 50.
5. Press [START].
The machine scans originals, then prints duplex copies when they are ready for
output.
Press [STOP/CLEAR] to suspend the scanning or printing job.
CAUTION
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode