Filter
Top Products
3-34
Output Mode for Machine with Finisher
Finisher FS-107 is initially equipped with two exit trays. If desired, up to two optional
exit trays can be installed.
Each exit tray provides output modes as described below.
1 Non-sort mode means that the offset-stacker finisher modes are not selected.
Copies will be stacked upon exit without being offset by sorted sets.
2 Sort mode outputs multiple copies of the original set; each sorted set will be offset
by 30mm upon exit.
3 Staple mode offsets and staples each sorted set. Up to 50 sheets (or a stack up to
5mm thick) can be stapled.
4 Group mode groups together multiple copies of each original and offsets the sets by
30mm upon exit.
The copier is initially set to output to tray 1 in Sort mode.
Follow the procedure on the next page to change the output mode, as desired.
4
1
2
3
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
1
1
1
2
2
2
4
4
4
3
3
3
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
Example:
Make 3 copied sets
from 4 original sheets
Offset by 30mm
1 oblique
staple
Offset by 30mm
2 staples
Group
Staple-sortSortNon-sort