Filter
Top Products
3-44
Interrupt Copying
Use the Interrupt mode to interrupt copying in progress to perform a simple job. When
interrupt copying is completed, the settings for the initial job restore automatically and
the Basic Screen displays.
Interrupt copying is available when the copier is performing the following operations:
• Continuously printing the image stored in memory
• Scanning the originals into memory
• Scanning the originals into memory while printing in Reserve mode
The Interrupt mode cannot be selected with the following copier conditions:
• The Basic Screen is not displayed.
• The Call for Service message displays or a paper misfeed occurs.
1. Press [INTERRUPT] on the control panel.
The [INTERRUPT] LED turns on and the SETTING indicator on the Basic Screen
changes to INTERRUPT.
HINT
The timing to enter the Interrupt mode varies according to the job in
progress on the machine when [INTERRUPT] is pressed.
See the following page.
2 31
564
897
0
STOP/CLEAR
CLEAR QTY.
START
CHECK
HELP
AUTO RESET
OUTPUT
APPLICATION
SCANNER / PRINTER
FAX
COPY
DATA
INTERRUPT
POWER SAVER
ON / OFF