Filter
Top Products
Checking Feature Selections and Proof Copying (continued)
3-43
6. Touch EXIT (or press [CHECK]) to return to the Basic Screen.
Change the settings, as required.
7. Change the print quantity, as required.
DETAILS
Proof copy can be performed as needed, until the print quantity amount on
the Basic Screen reaches zero.
If required, change the print quantity on the Basic Screen.
8. Press [START].
If the print quantity is not changed, the copier will output the rest, except the sample
sets.
CAUTION
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode