Filter
Top Products
3-12
Selecting Magnification Ratio (Lens Mode)
When the copier is turned ON, the magnification ratio is set to 1.00 (100%) automatically
on the Basic Screen.
Follow each procedure described in this section to select the desired magnification
ratio.
To Copy in 1.00 Magnification Mode
Follow this procedure to make a 100% copy of the original image.
1. Close the RADF securely, then press [AUTO RESET].
The initial settings are restored. Check that APS indicates that the 1.00 magnification
is selected.
HINT
The initial settings may be altered by the Key Operator. See p. 11-7 to p.
11-14.
2. Select additional copy conditions, as desired.
DETAILS
Specifying copy size will release 1.00 magnification and set
-A-
(AMS)
automatically. In this case, touch
1.00
to highlight it again.
3. Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-7 for details on setting print quantity.
4. Position original(s).
HINT
See p. 3-2 to p. 3-6 for details on positioning originals.
5. Press [START].