Konica Minolta 7130 Printer User Manual


 
[9] Weekly Timer (continued)
11-39
[5] Password Setting
Use this password setting mode to establish a 4-digit password requirement for using
Timer Interrupt function. The default password of 0000 allows the timer function to be
interrupted without the requirement for password entry.
Weekly Timer Setting Menu Screen W.T. Interrupt Password Setting Screen
Procedure
1 Touch [5] Password setting to display the W.T. Interrupt Password Setting Screen.
2 Use the touch screen keypad to enter a 4-digit password, and then touch OK to
complete the setting.
NOTE:
When the password setting is 0000, timer interrupt can be used simply by
turning the copier OFF, then ON.
3 Touch RETURN to return to the Weekly Timer Setting Menu Screen.
4 Touch RETURN to restore the Key Operator Mode Screen.
5 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
11
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Data
Panel Contrast
Paper Type
Lock Job
Memory
E.C.M.
Preset Key
Copier Initial
System Initial
Key Operator
Mode