Filter
Top Products
[4] E.C.M. (Electronic Copy Monitor) (continued)
11-20
[1] Change ECM Data
Assign an ID No. for an individual or for a group, then create individual password(s)
for each user. You can specify a name and limit count for each password.
❒ ECM ID No.: ID No. from 000~127, designated by key operator.
❒ ECM Password: Unique 5-digit numeric code programmed by key operator for user.
❒ User Name: max. 24 characters
❒ Copy Limit: 0 to 999,999 copies
ECM Setting Menu Screen ECM Data Input Screen
Procedure
1 Touch 1. Change E.C.M. data on the ECM Setting Menu Screen to display the ECM
Data Input Screen.
2 ID No. key is highlighted, enabling you to
immediately enter an ID No. Enter a 3-digit ID
No. from 000~127 using the keypad on the
control panel.
3 Touch Password to highlight it. Enter a 5-digit
ECM password using the keypad on the control
panel.
NOTES:
1. Do not enter “00000”. The initial ECM password
value is “00000”.
2. We recommend that you make a list of all ECM
passwords and ID Nos.
4 Touch Name to display the Name Input Screen.
If you do not specify the name, proceed to step 7.
This operation can be completed normally
without the name specified.
5 Input desired name according to the procedure
below.
(1) Max. 24 characters can be entered.
(2) Use Upper arrow and Lower arrow keys on
the Name Input Screen to input uppercase
and lowercase letters and symbols.