Filter
Top Products
Terminal Startup
5
6
-Set up the network communications-
·Press the MENU key, the Functions
Menu will open.
·Press 4, the System Setting menu will
open.
·From the System Setting menu, press 2 -
Set Network.
·Enter the IP Address for the terminal and
press OK.
·Enter the Mask Code and press OK.
·Enter the Gateway Address and press
OK.
·The terminal will automatically restart.
(For more detailed information turn to
page 10.)
Note: You may have to contact your
network administrator if you are unsure
how to set up the network
communications.
-Set up the first Administrator-
·Press the MENU key, the Functions
Menu will open.
·Press 1, the Set Admin menu will open.
·From the Set Admin menu, press 1 -
Admin 1.
·Position your face and follow the
prompts.
(For more detailed information turn to
page 11.)