Filter
Top Products
PAYCLOCK & FACEIN USER’S GUIDE
87
Appendix D - FaceIN WAN
Installation
These instructions identify the steps to configure the FaceIN
terminal to communicate with the PayClock database server across
the internet.
A print out of the “Server Summary” information is required for this
set up. If the information was not printed during the PayClock
software installation follow these steps to access the information.
• At the computer where the PayClock database server resides,
open the PayClock software.
• Click the PayClock orb on the upper left and from the menu,
select Support Assistant.
• In the Support Assistant window select
Connection Info
.
• Print the Connection_Info.txt file for use when configuring
the FaceIN.
WAN Installation Requirements
• There must be a VPN tunnel connecting the local and remote
sites.
• A static IP address is required on the computer designated as
the PayClock database server.
• A network administrator may be required to configure the
network routers to route the ports used by the FaceIN
terminals and PayClock database server.
Important Port Information - The following ports are used for this
type of installation.
• 7350 - PC600 Service
• 7351 - Auto Poll Service
• 2638 - PayClock Database Server