Filter
Top Products
PAYCLOCK & FACEIN USER’S GUIDE
67
• Select FaceIN from the drop down list and click OK.
• The FaceIN terminal properties will display on the right.
• From the Connection tab enter the name for the terminal
under Device Nickname.
• Enter the IP Address in the field, this is the address that was
set up on the FaceIN terminal, click Save.
• Click the Test Connection button to verify communications
with the FaceIN terminal.
• Select the Settings tab and click the Set button to send the
time/date to the terminal.
Connection tab - FaceIN Terminal
The Connection tab allows you to define the name and the IP
address for the terminal.
Employees tab - FaceIN Terminal
The Employees tab is used to assign employees to a terminal and to
un-assign employees from a terminal. Note: Employees are
automatically assigned to the terminal. If you wish not to have new
employees automatically assigned to the terminal select the option
“Do not automatically assign new employees to this terminal”.
Removing Employee Assignments
1. From the Ribbon Bar, click the Terminal Manager tab and select
the desired terminal from the list. The Terminal properties
window will display.
2. Click on the Employees tab, from the list on the right select the
desired employees and click the Remove button. The employees
will be removed from the list. Click Save