Filter
Top Products
Front view of server models with 2.5-inch hard disk drives
The following illustration shows the front view of server models with 2.5-inch hard disk drives.
ID
6
CPU
MemPSU
Figure 6. Front view of server models with 2.5-inch hard disk drives
1 Front panel 5 2.5-inch hard disk drive area
2 Pull-out information card
6 Slim optical drive (available in some models)
3 Intelligent Diagnostics Module
7 Left rack handle
4 Right rack handle
1 Front panel
For detailed information about the controls, connectors, and status LEDs on the front panel, see “Front
panel” on page 17.
2 Pull-out information card
The machine type, model, and serial number label of the server is attached on the pull-out information card.
See “Machine type, model, and serial number label” on page 13.
3 Intelligent Diagnostics Module
For more information, see “Intelligent Diagnostics Module” on page 19.
4 Right rack handle
7 Left rack handle
If your server is installed in a rack cabinet, you can use the rack handles to slide the server out of the rack
cabinet; or use the rack handles and screws to secure the server in the rack cabinet so that the server
cannot slide out, especially in vibration-prone areas. For more information, refer to the Rack Installation
Instructions that comes with your server.
16 ThinkServer RD330 User Guide