Lenovo 4302 Server User Manual


  Open as PDF
of 192
 
Notes:
• Enabled means that the function is congured.
• Disabled means that the function is not congured.
The Advanced menu contains the following submenus. For more information, enter the corresponding
submenu and refer to the instructions on the screen.
• PCI Conguration: View and set PCI conguration parameters.
• ACPI Conguration: View and set ACPI conguration parameters.
• Processor Conguration: View information about the installed microprocessor(s) and set microprocessor
conguration parameters.
• Memory Conguration: View information about the installed memory modules and set memory
conguration parameters.
• Chipset Conguration: View and set chipset conguration parameters.
• SATA/SAS Conguration: View information about the installed SATA or SAS devices and set SATA or
SAS conguration parameters.
• USB Conguration: View and set USB conguration parameters, such as enabling or disabling USB
devices.
• Super IO Conguration: View and set serial port conguration parameters.
• Serial Port Console Redirection: View and set conguration parameters for the serial port console
redirection.
Security menu
You can set passwords and congure the TPM function on the Security menu in the Setup Utility program.
For each menu item, press Enter to show selectable options and select a desired option by using the up and
down arrow keys or type desired values from the keyboard. Some items are displayed on the menu only if
the server supports the corresponding features.
Notes:
• Enabled means that the function is congured.
• Disabled means that the function is not congured.
The Security menu contains the following items:
• Administrator Password: Set an administrator password to protect against unauthorized access to
your server. See “Using passwords” on page 49
.
• User Password: Set a user password to protect against unauthorized access to your server. See “Using
passwords” on page 49
.
• TPM/TCM: Congure the TPM function if your server has a TPM installed in the TPM connector on the
system board. See “Conguring the TPM function” on page 50.
Server Management menu
You can view system information and view or change event log and BMC settings on the Server
Management menu in the Setup Utility program. On each submenu, press Enter to view the information or
show selectable options and select a desired option by using the up and down arrow keys. Some items are
displayed on the menu only if the server supports the corresponding features.
The Server Management menu contains the following submenus. For more information, enter the
corresponding submenu and refer to the instructions on the screen.
• Erase SEL: Erase system event log (SEL).
Chapter 5. Conguring the server 47
 previous next