Filter
Top Products
ThinkServer RAID 700 Adapter (also known as ThinkServer 9260-8i SAS RAID Adapter)
The following illustration shows the connectors on the ThinkServer RAID 700 Adapter.
Figure 16. ThinkServer RAID 700 Adapter
1 Ports 7-4
3 ThinkServer RAID 700 Battery connector
2 Ports 3-0
1 Ports 7-4
Used to connect a mini-SAS signal cable. See “Mini-SAS to mini-SAS signal cable connections” on page 29.
2 Ports 3-0
Used to connect a mini-SAS signal cable. See “Mini-SAS to mini-SAS signal cable connections” on page 29.
3 ThinkServer RAID 700 Battery connector
Used to connect a ThinkServer RAID 700 Battery. See “Installing or removing the ThinkServer RAID 700
Battery” on page 93
.
Hot-swap hard disk drive backplane
Your server comes with one of the following hot-swap hard disk drive bay and backplane congurations:
• Up to four 3.5-inch hot-swap SATA or SAS hard disk drives with one backplane
• Up to six 2.5-inch hot-swap SAS hard disk drives or SATA solid-state drives with one backplane
To locate the backplane, see “Server components” on page 22.
Backplane for 3.5-inch hard disk drives
This topic provides information to help you locate the connectors on the backplane for 3.5-inch hard disk
drives.
Chapter 3. Product overview 27