Filter
Top Products
27
Chapter 6: Setting up and Configuring the Router
Setup Tab - Forwarding
10/100 16-Port VPN Router
If you want to delete a service you have created, select it and click the Delete selected service button. Then,
click the Save Setting button to save your changes. Click the Exit button to return to the Forwarding screen.
If you want to add another service, click the Add New button. Enter a name in the Service Name field. From
the Protocol drop-down menu, select the protocol it uses. Enter its range in the Port Range fields. Click the
Add to List button. Then, click the Save Setting button to save your changes. Click the Cancel Changes
button to cancel your changes. Click the Exit button to return to the Forwarding screen.
3. On the Forwarding screen, enter the IP address of the server that you want the Internet users to access. Then
click the Enable checkbox to enable this port range forwarding entry.
4. Click the Add to List button, and configure as many entries as you would like, up to a maximum of 30. To
delete an entry, select it and click the Delete selected application button.
Port Triggering
Port triggering allows the Router to watch outgoing data for specific port numbers. The IP address of the
computer that sends the matching data is remembered by the Router, so that when the requested data returns
through the Router, the data is pulled back to the proper computer by way of IP address and port mapping rules.
Some Internet applications or games use alternate ports to communicate between the server and LAN host.
When you want to use these applications, enter the triggering (outgoing) port and alternate incoming port in the
Port Triggering table. Then the Router will forward the incoming packets to the LAN host.
1. For each application, complete the Application Name, Trigger Port Range, and Incoming Port Range fields.
2. Click the Add to List button, and configure as many entries as you would like, up to a maximum of 30. To
delete an entry, select it and click the Delete selected application button.
Click the Save Settings button to save your changes, or click the Cancel Changes button to undo your changes.
Click the Show Tables button to see the details of your port range forwarding and port triggering entries.
Figure 6-18: Service Management