Filter
Top Products
74
Chapter 6: Setting up and Configuring the Router
Wizard Tab
10/100 16-Port VPN Router
4. On the screen shown in Figure 6-104, select the WAN (or Internet) Connection Type for the Interface listed
(generally, the Setup Wizard will begin with WAN1). Select the appropriate connection type: Obtain an IP
automatically, Static IP, or PPPoE. Click the Next button to continue. Click the Previous button if you want
to return to the previous screen. Click the Exit button if you want to exit the Setup Wizard.
5. Depending on which connection type you have selected, the appropriate screen will appear. Follow the
instructions for the appropriate connection type:
Obtain an IP automatically
If you chose Obtain an IP automatically, the screen shown in Figure 6-105 will appear. If you want to use the
ISP’s DNS server, select Use DNS Server provided by ISP (default). If you want to designate a specific DNS
server IP address, select Use the Following DNS Server Addresses, and enter the DNS server IP addresses
you want to use (you must enter at least one).
Click the Next button to continue, and proceed to step 6. Click the Previous button if you want to return to the
previous screen. Click the Exit button if you want to exit the Setup Wizard.
Figure 6-105: Obtain an IP Automatically
Figure 6-104: WAN Connection Type