Filter
Top Products
77
Chapter 6: Setting up and Configuring the Router
Wizard Tab
10/100 16-Port VPN Router
6. Repeat step 5 for the rest of the Router’s WAN ports. When it is time to configure the DMZ port, proceed to
step 7.
7. On the screen shown in Figure 6-110, enter the DMZ IP address provided by the ISP in the DMZ IP fields. Then
complete the Subnet Mask field. If you are not using the DMZ port, enter 0 in each of the DMZ IP fields. Click
the Next button to continue. Click the Previous button if you want to return to the previous screen. Click the
Exit button if you want to exit the Setup Wizard.
8. The screen shown in Figure 6-111 will appear. If you want to save your changes, click the Save Settings
button. Click the Previous button if you want to return to the previous screen. Click the Exit button if you
want to exit the Setup Wizard.
Figure 6-111: Save Settings
Figure 6-110: DMZ