Filter
Top Products
Assigning Lines to the Voice Port(s) Used for Outcalling
If the communications system is operating in Key Mode and Outcalling is used, you must assign one or
more outside lines to the MERLIN Messaging System ports used for Outcalling. You must also set the lines
to No Ring, as described in the next procedure, to ensure proper operation. These procedures are not
necessary if the communications system is operating in the Hybrid/PBX mode.
To add an outside line to the extension used for Outcalling in Key mode:
Step Programming Task Console Input/Selection PC Input/Selection
1 Enter Programming mode
Sys Program
Exit/Start
[any key]
2 Select Extensions Extensions
3 Select Lines/Trunks Lines/Trunks
4 Enter the extension number you want
to program
[nnn]
Enter
[nnn]
5 Add the Outcalling Line Assignments
by selecting each line button and
turning on the green
Message-Waiting light
Press line button or console
or +
function key
6 Press Exit/Back when you have
finished adding the Outcalling lines
to that extension
Exit/Back
7 Return to System Programming menu Exit/Back
Exit/Back
Procedures
Creating a Calling Group and Assigning Group Members
Enabling Rotary Signaling
Setting the Outcalling Lines to No Ring
Assigning Lines to the Voice Port Used for Outcalling
http://www.sostc.com/lucent/installation/programming_communication/mmipcpmp3.htm [2/2/2000 2:32:22 PM]