Filter
Top Products
Programming a Coverage VMS Off Button
This feature prevents unanswered external calls from receiving coverage by the MERLIN Messaging System. It
can be programmed at the user’s telephone or through Centralized Telephone Programming. The Centralized
Telephone Programming procedure is documented below.
To program a Coverage VMS Off button:
Step Programming Task
Console Input/Selection PC Input/Selection
1 Enter Programming mode
Sys Program
Exit/Start
[any key]
2 Display next page of menu /
3 Select Centralized
Telephone Programming
Cntr-Prg
4 Select Program Extension Program Ext
5 Enter the extension you
want to program
[nnn]
Enter
[nnn]
6 Start Centralized Telephone
Programming
Start
7 Select line/feature button Press button on console
or + function
key, then
8 Select Coverage VMS Off
feature
or
ListFeature
/
CoverageVMS
or
Function key corresponding to
CoverageVMS
9 Return to System
Programming menu
Sys Program
Exit/Back
Exit/Back
Procedures
Programming Coverage Inside
Programming Direct Voice Mail
Programming an Auto Dial Button
Programming a Coverage VMS Off Button
http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpcs9d.htm (1 of 2) [2/2/2000 2:33:58 PM]