To modify an announcement:
Step Programming Task Touch-Tone Input
9 If system is in Bilingual mode, go to Step 10. If
system is in Monolingual mode, choose one of the
following:
Record new announcement; then after
recording, press
and choose one of the
following:
Approve❍
Listen to announcement❍
Re-record announcement❍
Delete new recording❍
●
Use existing announcement. For
Monolingual mode, procedure is finished.
●
[record announcement]
Back
(mmipcpmm19a)
http://www.sostc.com/lucent/installation/prog_merlin_mess/mmipcpmm19a2.htm [2/2/2000 2:32:54 PM]