Filter
Top Products
Programming the Message-Waiting Receiver
When a Calling Group has a mailbox, it is useful to designate an extension as a Message-Waiting Receiver for
the Calling Group. The Message-Waiting lights on the designated extension whenever a caller leaves a
message for the Calling Group.
To confirm the Message-Waiting Receiver:
Step Programming Task Console Input/Selection PC Input/Selection
1 Enter programming mode
Sys Program
Exit/Start
[any key]
2 Select Extensions Extensions
3 Display next page of menu /
4 Select Group Calling Grp Calling
5 Select Message-Waiting Receiver Message
6 To erase current setting or
Backspace
+
7 Enter the extension number of the
Calling Group
[nnn]
Enter
[nnn]
8 Enter the extension number of the
telephone you want to assign as
Message-Waiting Receiver
[nnn]
Enter
[nnn]
9 Return to System Programming menu Exit/Back
Exit/Back
Programming the Message-Waiting Receiver
http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpcs7.htm [2/2/2000 2:33:55 PM]