Programming Date and Time
You must set the system date and time. These parameters cannot be set independently of each other; both date and
time must be set.
To program the Date and Time:
Step Programming Task Touch-Tone Input
1 Log in to System Administration, if needed
2 Select System Parameters
3 Select System Date and Time
4 Choose one of the following:
Enter date
Example: February 26, 2000 = 022600
●
Keep current date●
[mmddyy] or
5
Choose one of the following:
Enter time (24-hour clock)
Example: 3:45PM = 1545
●
Keep current time●
[hhmm] or
6 Choose one of the following:
Approve●
Re-enter
(Return to Step 4)
●
or
Programming Date and Time
http://www.sostc.com/lucent/ongoingmaintenance/managingsystem/modsysparams/mmipcpmm6.htm [2/2/2000 2:34:29 PM]