Programming Labels
You may program labels to identify your Calling Group and MERLIN Messaging System ports. This will
cause the names you program to appear on display telephones when:
The MERLIN Messaging System is dialed.●
A call is received or transferred from the MERLIN Messaging System.●
Refer to the communications System Planning Form containing System Numbering: Extension Jacks
information to identify labels.
To program labels:
Step Programming Task Console Input/Selection PC Input/Selection
1 Enter programming mode
Sys Program
Exit/Start
[any key]
2 Display next page of menu /
3 Select Labeling Labeling
4 Select Group Calling
Grp Calling
5 Enter the extension number of the
MERLIN Messaging System Calling
Group
[nnn]
Enter
[nnn]
6 "MERMSG" or some other
designation that would identify the
calling group
[nnnnnnn]
Enter
[nnnnnnn]
7 Return to the previous menu
Exit/Back
8 Select Directory
Directory
9 Select Extension Extensions
10 Enter the extension number of the
MERLIN Messaging System port
[nnn]
Enter
[nnn]
11 To erase current current label or
Backspace
+ or
12 Enter "MERMSG" or some other
designation that would be meaningful
for the MERLIN Messaging System
[nnnnnnn] [nnnnnnn]
13 Save your entry
Enter
Programming Labels
http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpcs8.htm (1 of 2) [2/2/2000 2:33:56 PM]