To set the VMS Transfer Return Interval:
Step Programming Task Console Input/Selection PC Input/Selection
1 Enter Programming mode
Sys Program
Exit/Start
[any key]
2 Select Auxiliary Equipment
AuxEquip
3 Select Voice Messaging
System/Automated Attendant
VMS/AA
4 Select Transfer Return
TransferRtn
5 Erase current number of rings Drop or
Backspace
6 Enter number of rings before
calls are returned from transfer
[n]
Enter
[n]
7 Return to System Programming
menu
Exit/Back
Exit/Back
Procedure
Redirecting Calls Sent to Unassigned Extensions
To set the VMS Transfer Return Interval
http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpcs2b1.htm [2/2/2000 2:33:24 PM]