Filter
Top Products
Change Daily System Maintenance Time
The MERLIN Messaging System is factory set to restart itself each day at 3:00 am. This
Scheduled System Restart is designed to allow the MERLIN Messaging System to perform
system and diagnostic checks to ensure system and data integrity. The Scheduled System
Restart eliminates the need for you to manually perform several diagnostic audits and ensures
that MERLIN Messaging System diagnostics are performed on a regular basis.
The MERLIN Messaging System keeps a time record of the last Scheduled or Manual System
Restart. If the last system restart occurred within the last 23 hours, the MERLIN Messaging
System cancels Scheduled System Restart.
A Scheduled System Restart is initiated only if the MERLIN Messaging System is idle, i.e., all
of the voice messaging ports are "on hook." If any voice messaging ports are busy, the system
cancels the Scheduled System Restart then checks for an idle status every 5 minutes for a one
hour period. If the MERLIN Messaging System is not idle during this one hour period, the
Scheduled System Restart is cancelled until the next day at the scheduled time.
While a System Restart is in progress, all voice messaging ports are busied out and all event
data is written to the Event Log before the MERLIN Messaging System shuts down. When the
System Restart is complete, the MERLIN Messaging System refreshes the Message-Waiting
lights and logs the voice messaging ports into the MERLIN Messaging System Calling Group
so that the MERLIN Messaging System can respond to calls.
You can use the Change Daily System Maintenance Time option to do the following:
Turn off the Scheduled System Restart (not recommended)●
Change the Scheduled System Restart time●
Procedure
Changing the Daily System Maintenance Time
Click Below to:
Return to the Service Technician Options Menu Screen
Change Daily System Maintenance Time
http://www.sostc.com/lucent/ongoingmaintenance/terminalbased/ChangeDaily.htm [2/2/2000 2:35:22 PM]