Filter
Top Products
Programming Coverage Inside Button
Coverage Inside prevents or allows coverage of inside calls. If Coverage Inside Off is programmed, only outside calls are
covered. Coverage Inside On allows both inside and outside calls to receive coverage. This feature can be programmed at
the user’s telephone or through Centralized Telephone Programming. The Centralized Telephone Programming procedure
is documented below.
To program a Coverage Inside button:
Step Programming Task Console Input/Selection PC Input/Selection
1 Enter programming mode
Sys Program
Exit/Start
[any key]
2 Display next page of menu /
3 Select Centralized Telephone
Programming
Cntr-Prg
4 Select Program Extension
Program Ext
5 Enter the extension you want
to program
[nnn]
Enter
[nnn]
6 Start Centralized Telephone
Programming
Start
7 Select line/feature button Press button on console
or + function
key, then
8 Choose an option:
Coverage Inside Off●
Coverage Inside On●
or
ListFeature
/
Cover Inside
On or
Off
Enter
Function corresponding to
Cover Inside
or
9 Return to System
Programming menu
Sys Program
Exit/Back
Exit/Back
Programming Coverage Inside Button
http://www.sostc.com/lucent/installation/programming_the_communication_system/mmipcpcs9e.htm (1 of 2) [2/2/2000 2:33:59 PM]