Filter
Top Products
Setting Transfer Restrictions
The factory setting for Transfer Restrictions is On. When Transfer Restrictions are set to On,
transfers (
transfers, Automated Attendant Direct extension transfers and Personal Operator
transfers) are restricted to extensions that are contained in the extension list (Automated
Attendant extensions, Mailbox extensions, Transfer-Only extensions and Fax extensions) and to
the Call Answer Service Operator extension. This helps to prevent users and callers from
committing toll fraud by transferring to an outside operator who could place a call for them.
Transfer Restrictions can be set to Off; however, changing the factory setting to this option is
strongly discouraged, as it leaves your system vulnerable to toll fraud.
Setting the Transfer Restrictions to Off leaves your system vulnerable to toll
fraud. Lucent Technologies strongly recommends that you keep the Transfer
Restrictions set to On.
To set Transfer Restrictions:
Step Programming Task Touch-Tone Input
1 Log in to System Administration, if needed
2 Select System Security Parameters
3 Select Transfer Restrictions
4 Choose one of the following:
On●
Off●
If finished●
or
Procedure
Setting Minimum Password Length
Setting Transfer Restrictions
http://www.sostc.com/lucent/ongoingmaintenance/managingsystem/modsyssec/mmipcpmm24.htm [2/2/2000 2:35:03 PM]