Filter
Top Products
7
7.6 Setting Up the Fax Registration
7-28
Using the Utility Mode Chapter 7
number, and then skip to step 10.
❍ If you wish to change the fax number, press the [No] key, and then enter the
correct number.
❍ For details on F codes (SUB and SID), refer to “Using F codes .
7 Press the [ ] key, and then use
the 10-Key Pad to enter the SUB.
❍ A number up to 20 digits long
can be entered for the SUB.
❍ To enter an SID, continue with
step 8.
❍ If an SID will not be entered, skip to step 9.
8 Press the [ ] key, and then use
the 10-Key Pad to enter the SID.
❍ A number up to 20 digits long
can be entered for the SID.
9 Press the [Yes] key.
10 Using the [ ] and [ ] keys,
select the desired modem speed.
11 Press the [Yes] key.
The settings are registered. To
program another one-touch dial
key, repeat steps 3 through 11.
12 Press the [No] key to finish
programming.
The “FAX REGISTRATION” menu
appears again.