Filter
Top Products
9
9.2 Getting Ready
9-42
Internet Fax & Network Scan Chapter 9
9.2.3.1 Using the Control Panel To Add Addresses
Specifying the Settings for a One-Touch Dial Key
1 Press the [Utility] key.
2 Press the key until “FAX
REGISTRATION” appears.
3 Press the [1] key on the 10-key pad
to select “ONE-TOUCH DIAL”.
4 Press the one-touch dial key where
you wish to add an address, and
then press the [Yes] key.
5 Enter the recipient name.
❍ For information on entering text, refer to “Entering Text” on
page 3-18.
❍ Up to 20 characters can be
entered for the recipient name.
6 Press the [Yes] key.
7 Enter the e-mail address of the
recipient.
❍ For information on entering text,
refer to “Entering Text” on page 3-18.
❍ Up to 64 characters can be entered for the e-mail address.
❍ If only numbers are entered for the address, it will be regarded as
a fax number.
8 Press the [Yes] key.
❍ The [Yes] key cannot be pressed if the e-mail address does not
contain “@”.
❍ The settings are registered. To add information for other one-touch
dial keys, repeat steps 4 through 8.