Filter
Top Products
9.2 Getting Ready
9
9-31
Internet Fax & Network Scan Chapter 9
2 Enter the password.
❍ For information on entering text,
refer to “Entering Text” on
page 3-18.
❍ Up to 32 characters can be entered for the password.
❍ The illustration at the right is an example of the password display.
Consult your network administrator for details about this setting.
3 Press the [Yes] key.
The E-MAIL SETTING 2 screen appears again.
Setting Up Auto Reception
1 From the “E-MAIL SETTING 2”
menu in the Utility mode, press the
[6] key on the 10-key pad to select
“AUTO RECEPTION”.
2 Press the and keys to
select “ON” or “OFF”, and then
press the [Yes] key.
❍ If “ON” is selected, the screen used to specify the time interval for
checking e-mail appears. (Go to step 3.)
❍ If “OFF” is selected, the E-MAIL SETTING 2 screen appears again.
3 Specify the time interval (in
minutes) for checking e-mail.
❍ The time interval for
automatically checking for new e-mail messages can be set
between 1 minute and 60 minutes.
4 Press the [Yes] key.
The E-MAIL SETTING 2 screen appears again.