Filter
Top Products
9
9.3 Using Scan to E-mail Operations
9-64
Internet Fax & Network Scan Chapter 9
9.3.3 Specifying the Destination Using Speed Dial Numbers
✎
Note
The speed dial setting must have already been specified.
For information on setting up speed dial numbers, refer to “Adding
Destinations” on page 9-41.
1 Press the [Speed Dial] key, and
then use the 10-key pad to enter the
3-digit speed dial number
programmed with the e-mail
address where you want to send the
scan data.
❍ If you make a mistake, press the
[No] key, and then enter the
correct number.