Filter
Top Products
9
9.2 Getting Ready
9-54
Internet Fax & Network Scan Chapter 9
File Destination
E-Mail Notification
Account Information
Function Description
Destination Name This function is used to specify the name for the file destination.
(Up to 20 characters)
FTP Server Address This function is used to specify the host name or IP address of
the FTP site where the scan data will be sent. (Up to 64
characters)
Directory This function is used to specify the file path of the directory on
the FTP site where the scan data will be stored. (Up to 128
characters)
Use Proxy This function is used to specify whether or not to access the
FTP site via a proxy server. (For information on proxy server
settings, refer to “FTP & DNS Configuration” on page 9-36.)
Remote Port Number This function is used to specify the remote port number (1 to
65535) if a proxy server is not being used. Normally, port
number 21 is used.
Function Description
Enable Notification This function is used to specify whether or not to send an e-mail
notification when scan data is uploaded to an FTP server.
Notification Address This function is used to specify the e-mail addresses (up to 10)
where e-mail notifications should be sent. (Up to 64 characters)
Function Description
Anonymous This function should be selected if the FTP site is an
anonymous FTP server.
Private Site If the FTP site requires user authentification, specify settings
for the following.
User Name: The user name (up to 20 characters) used to log
in to the FTP site
Password: The password (up to 20 characters) associated with
the user name used to log in to the FTP site
Confirm: Used to specify the password for confirmation