Filter
Top Products
7.6 Setting Up the Fax Registration
7
7-41
Using the Utility Mode Chapter 7
5 Using the [ ] and [ ] keys,
select either “EDIT” or “DELETE”,
and then press the [Yes] key.
❍ If “EDIT” was selected, the
programmed transmission
time is displayed. (Continue with step 6.)
❍ If “DELETE” was selected, the program dialing settings are deleted and the
“SELECT REGIST.KEY” screen appears again.
6 To change the transmission time,
press the [No] key, and then use
the 10-Key Pad to enter the
correct time.
If you do not wish to change the
transmission time, press the [Yes]
key.
The recipient is displayed.
7 To change the recipient, press the
[No] key, and then by using the
one-touch dial keys or the speed
dial numbers, or by entering the
fax number using the 10-Key Pad,
specify a different recipient.
❍ Change the F codes (SUB and SID) as desired.
8 Press the [Yes] key.
❍ Other program dialing settings can be changed.
9 Press the [No] key to return to the
“FAX REGISTRATION” menu.
To change/delete a programmed mailbox transmission
1 Select the “FAX REGISTRATION” menu.
❍ Refer to “Setting Up the Fax Registration .