Filter
Top Products
7
7.6 Setting Up the Fax Registration
7-46
Using the Utility Mode Chapter 7
Specifying the Setting for “BATCH TX”
If the batch transmission setting (transmission time) is specified for a one-touch dial
key programmed with recipient fax numbers, multiple documents can be stored in
the memory and sent out together at the specified time.
✎
Note
A one-touch dial key must first be programmed with the fax number of the
recipient for the batch transmission.
To set batch transmitting
1 Select the “FAX REGISTRATION”.
❍ Refer to “Setting Up the Fax Registration .
2 For FAX3900: Press the [5] key
from the 10-Key Pad to select
“BATCH TX”.
❍ For FAX2900: Press the [4]
key from the 10-Key Pad to
select “BATCH TX”.
3 Press the one-touch dial key
programmed with the recipient
that you wish to send the batch
transmission fax to.
❍ For FAX3900, use the [ ]
and [ ] keys to select a one-
touch dial key between [1-32]
and [33-64], and then press
the [Yes] key.
A screen appears, allowing you to specify the transmission time.
?
Was the one-touch dial key that was pressed one programmed for group
4
FAX3900
FAX2900
ONE-TOUCH DIAL_33__