Filter
Top Products
2
2.1 Installation Precautions
2-2
Precautions Chapter 2
Observe the following precautions to maintain the machine in its best possible
condition.
2.1 Installation Precautions
Installation Site
To ensure utmost safety and prevent possible malfunctions, install the machine in
a location that meets the following requirements:
- A location away from curtains, etc. that may catch fire and burn easily
- A location that is not exposed to water or other liquids
- A location free from direct sunlight
- A location out of the direct airflow of an air conditioner or heater, and not
exposed to extremely high or low temperatures
- A well-ventilated location
- A location that is not exposed to high humidity
- A location that is not extremely dusty
- A location not subjected to undue vibrations
- A stable and level location
- A location where ammonia or other organic gases are not generated
- A location that does not put the operator in the direct airflow of exhaust from the
machine
- A location that is not near any kind of heating devices
Power Source
The power source requirements are as follows.
● Voltage Fluctuation: AC110V -10%, AC127V +6%, or AC220-240 V ±10%
● Frequency Fluctuation: Within ±3Hz
❍ Use a power source with as few voltage or frequency fluctuations as possible.