Filter
Top Products
9
9.2 Getting Ready
9-16
Internet Fax & Network Scan Chapter 9
9.2.2 Specifying the Network Settings
Depending on the network environment in which the copier is located,
there may be some restrictions on the network functions that the copier
can use. Specify the network settings to suit the functions and
environment required for your configuration.
The network settings can be specified from the control panel of the copier
or using the Administrator mode of PageScope Light.
9.2.2.1 Quick Overview of the Network Settings
Function Description
Internet
Faxing
Scan
to E-
mail
Scan to
Server
Setting
Control
Panel
PageScope
Light
2: Required; -: Unnecessary; ●: As necessary 2 : Possible
- : Not possible
NETWORK SETTINGS
IP ADDRESS This function is
used to specify the
IP address for the
copier.
Consult your
network
administrator for
information about
the IP address to
use.
2*2 2*2 2*2 22
SUBNET
MASK
This function is
used to specify the
subnet mask value
for the network.
Consult your
network
administrator for
details.
2*2 2*2 2*2 22
GATEWAY
This function is
used to specify the
default gateway
(IP address) of a
router on the
network.
Consult your
network
administrator for
details.
2*2 2*2 2*2 22