Filter
Top Products
7.8 Setting Up the Reception
7
7-67
Using the Utility Mode Chapter 7
Specifying the Setting for “FOOTER”
1 Select the “RX OPERATION”.
❍ Refer to “Selecting the “RX OPERATION” menu .
2 Press the [7] key from the 10-Key
Pad to select “FOOTER”.
3 Using the [ ] and [ ] keys,
select either “ON” or “OFF”, and
then press the [Yes] key.
The “RX OPERATION” menu
appears again.
Specifying the Setting for “SELECT TRAY”
1 Select “RX OPERATION”.
❍ Refer to “Selecting the “RX OPERATION” menu .
2 Press the [8] key from the 10-Key
Pad to select “SELECT TRAY”.
3 Using the [ ] and [ ] keys,
select a paper tray, and then press
the [Yes] key.
4 Using the [ ] and [ ] keys,
select either “DISABLE” or
“ENABLE”, and then press the
[Yes] key.
The “RX OPERATION” menu
appears again.