Filter
Top Products
5.1 Dialing
5
5-5
Faxing Chapter 5
To fax using speed dialing
If speed dial numbers have already been programmed, the fax number of a
recipient can be specified quickly by entering the corresponding speed dial number.
For details on programming speed dial numbers, refer to “Specifying the Setting for
“SPEED DIAL”” on page 7-31.
1 Press the [Fax] key to enter Fax mode.
2 Load the document into the Auto Document Feeder.
3 If necessary, change the “Resolution” setting (p. 5-12).
4 Press the [Speed Dial] key, and
then use the 10-Key Pad to enter
the 3-digit speed dial number.
?
Has the wrong speed dial
number been entered?
➜ Press the [No] key, and then
enter the correct number.
5 Press the [Start] key to begin scanning and sending the fax.