Filter
Top Products
9.3 Using Scan to E-mail Operations
9
9-57
Internet Fax & Network Scan Chapter 9
9.3.1 Transmission Procedures
9.3.1.1 Starting to Scan
1 Press the [Scan] key.
The copier switches to Scan mode,
and the Scan screen appears.
2 Place the document to be scanned
in the auto document feeder.
❍ Adjust the guides to the size of
the document.
❍ Load the document with the
surface to be scanned face up.
3 Press the [123/ABC] key.
4 Press the keys on the 10-key pad to
enter the e-mail address, and then
press the [Yes] key. The e-mail
address can also be specified using
one of the following methods.
❍ “Specifying the Destination Using One-Touch Dial Keys” on
page 9-63.
❍ “Specifying the Destination Using Speed Dial Numbers” on
page 9-64.
❍ “Specifying the Destination Using the Phone Book” on page 9-66.
❍ To skip specifying the subject line, resolution, etc., press the [Start]
key, instead of the [Yes] key.