Filter
Top Products
7.6 Setting Up the Fax Registration
7
7-29
Using the Utility Mode Chapter 7
To change/delete a programmed one-touch dial key
1 Select the “FAX REGISTRATION”.
❍ Refer to “Setting Up the Fax Registration .
2 Press the [1] key from the 10-Key
Pad to select “ONE-TOUCH
DIAL”.
3 Press the one-touch dial key that
you wish to change or delete, and
then press the [Yes] key.
❍ For FAX3900, use the [ ]
and [ ] keys to select a one-
touch dial key between [1-32]
and [33-64], and then press
the [Yes] key.
4 Press the [No] key.
❍ If a one-touch dial key
programmed with a group of
fax numbers or a transmission/
reception function is pressed,
the message shown at the
right appears. To delete the
programmed settings, press
the [No] key. The “FAX
REGISTRATION” menu
appears again.
❍ To change the group dialing or
program dialing settings, refer to page 7-36 and page 7-38.
5 Using the [ ] and [ ] keys,
select either “EDIT” or “DELETE”,
and then press the [Yes] key.
❍ If “EDIT” was selected, the
name is displayed. (Continue
with step 6.)
❍ If “DELETE” was selected, the settings programmed for the one-touch dial
key are deleted and the “SELECT REGIST.KEY” screen appears again.
❍ If you try to change the settings for a one-touch dial number used in group