Filter
Top Products
7
7.9 Setting Up the Communication
7-70
Using the Utility Mode Chapter 7
3 Using the [ ] and [ ] keys,
select either “TONE” (for tone
dialing) or “PULSE” (for pulse
dialing), and then press the [Yes]
key.
4 If “PULSE” was selected, select
either “10pps” or “20pps”, and
then press the [Yes] key.
The “COMM.SETTING” menu
appears again.
Specifying the Setting for “LINE MONITOR”
1 Press the [Utility] key eight times.
“COMM. SETTING” appears.
2 From the 10-Key Pad, press the
[2] key.
A screen appears, allowing you to
select the monitoring volume.
3 Using the [ ] and [ ] keys,
select “HIGH”, “LOW” or “OFF”,
and then press the [Yes] key.
The “COMM.SETTING” menu
appears again.
Utility