Filter
Top Products
7
7.6 Setting Up the Fax Registration
7-36
Using the Utility Mode Chapter 7
numbers can be specified as one group.
❍ With group dialing, a one-touch dial key programmed with a group can be
specified. In that case, the number of fax numbers programmed in the
specified one-touch dial key (group dial key) is added.
7 When you are finished specifying
recipients, press the [Start] key.
The settings are registered.
To program another group, repeat
steps 3 through 7.
8 Press the [No] key to finish
programming.
The “FAX REGISTRATION” menu
appears again.
To change/delete a programmed group of fax numbers
1 Select the “FAX REGISTRATION”.
❍ Refer to “Setting Up the Fax Registration .
2 Press the [3] key from the 10-Key
Pad to select “GROUP DIAL”.
3 Press the one-touch dial key that
you wish to change or delete.
❍ For FAX3900, use the [ ]
and [ ] keys to select a one-
touch dial key between [1-32] and [33-64], and then press the [Yes] key.
4 Press the [No] key.
5 Using the [ ] and [ ] keys,
select either “EDIT” or “DELETE”,
and then press the [Yes] key.
❍ If “EDIT” was selected, the