Filter
Top Products
ION 7500 / ION 7600 User’s Guide Basic Meter Configuration
Chapter 4 - Using ION Software Page 121
Basic Meter Configuration
The Setup Assistant is a user interface that contains relevant instructions to help
guide you through common setup requirements for your ION meter. After you
have added a device to ION Setup in network mode, or connected using single
device mode, the Setup Assistant appears in the right pane. Double-click the Setup
Assistant to access the setup dialog box.
The Setup Assistant is accessible in both single device mode and network mode.
The Setup Screens on the left let you access different setup tabs on the right. It is
from these setup tabs that you can configure a meter’s setup registers.
Changing a setup register
1. Highlight the Setup Screen you want and select the desired tab where
applicable.
Important notices may be
included in the description
box. Read them carefully
before proceeding with
your configuration
changes.