Filter
Top Products
ION 7500 / ION 7600 User’s Guide Configuring the Meter with the Front Panel
Chapter 2 - Using The Front Panel Page 31
Configuring the Meter with the Front Panel
The front panel allows you to setup and configure the meter at its installed
location. When you change a setting in the front panel’s Setup menu, you are
actually altering the setup register value of an ION module. (ION module links
cannot be added or deleted using the front panel.) The front panel’s Setup menu
also provides you with quick access to parameter resets for common cumulative
parameters.
The Front Panel’s Setup Menu
To access the Front Panel’s Setup Menu, press that PROG (programming) button.
Pressing the
ESC (escape) button returns you to the data display screens.
Use the Navigation buttons
to select (highlight) choices
and enter numerical data.
The arrow indicates that
there are more Setup
menu items available by
scrolling down the menu.
Use the Softkey buttons
to make choices when
Softkey titles appear
above them.
Each time you enter programming mode, the front panel
helps you keep track of your configuration changes by
marking the Setup menu (and sub-menu) items that you
have accessed. These check-marks are cleared when you
exit programming mode.
Press the PROG (programming)
button to access the Setup menu
and enter configuration changes.
Use the ESC (escape)
button to return to a
previous (higher) menu
and exit the Setup menu.