Filter
Top Products
ION 7500 / ION 7600 User’s Guide I/O Solutions
Digital and Analog I/O Technical Note Page 211
I/O Solutions
ION meters offer you a range of onboard I/O. For expanded I/O applications, you
can use Grayhill products (see the Grayhill OpenDAC and ION Technology technical
note for further information). Configuring onboard and expanded I/O is the same
with ION software.
Every ION meter has a set of software modules that control its analog and digital
onboard I/O ports. There is one ION software module that corresponds to each
hardware input or output port, for example, one Digital Input software module
corresponds to one hardware input port.
Onboard I/O requires minimal setup with Designer software. The I/O Expander
for the ION 8000 Series meters and expansion boards for the ION 7700, ION 7300
Series, ION 7500, and ION 7600 require similar setup to the onboard I/O with
Designer software.
Refer to your meter User’s Guide or technical documentation, or the online
ION Programmer’s Reference for complete details on how to link and configure these
ION modules using Designer software.
Onboard I/O for ION Meters
The number of digital and analog inputs and outputs on each ION meter is listed
below.
* Some digital inputs/outputs and all analog inputs require the installation of an optional circuit board
inside the meter. See the meter’s data sheet for complete details.
Meter
Digital
Inputs*
Digital
Outputs*
Analog
Inputs*
Analog
Outputs
Modbus
Master
ION 6200
0200
ION 7300
0444
ION 7330
4444
ION 7350
4444
ION 7500
16744yes
ION 7600
16744yes
ION 7700
8040
ION 8300
3400
ION 8400
3400yes
ION 8500
3400yes