Filter
Top Products
Troubleshooting > 166
Error
544
545
546
547
Please check %COLOR% Toner
Cartridge: %ERRCODE%
Toner cartridge lever has not been
locked.
Lock into place securely.
Error 544: Y
Error 545: M
Error 546: C
Error 547: K
Error
340
341
342
343
Please check %COLOR% Image Drum Image drum not installed correctly.
Fit image drum.
Error 340: Y
Error 341: M
Error 342: C
Error 343: K
Error
320
Please check Fuser Unit Fuser unit is not installed correctly.
Fit fuser unit.
Error
330
Please check Belt Unit Belt unit is not installed correctly.
Fit belt unit.
Error
321
Power Off and Wait for a while Motor driver IC overheat detected.
Error
310
311
Cover Open
Close the flashing cover
Close the cover.
Error 310: Top cover
Error 311: Front cover
If the code still appears, contact your
dealer.
Error
316
Cover Open
Close the flashing cover
Close the duplex cover.
If the code still appears, contact your
dealer.
Error Cover Open
Close the flashing cover
Indicates that the ADF cover is open.
Indicates that the inter-lock cover on
the scanner unit is lifted up.
Note: If the inter-lock cover is lifted up
during scanning from the ADF, a
document jam message will display.
If the code still appears, contact your
dealer.
Error Document jam!
Open & check the
flashing cover
Indicates a document jam has occurred
during scanning.
See “Clearing Paper Jams” .
If the code still appears, contact your
dealer.
Error Wait a Moment
Program Data Receiving
Your machine's network card firmware
is being reprogrammed.
Error Wait a Moment
Program Data Received OK
Your machine's network card firmware
is being reprogrammed.
STATUS /
CODE
MESSAGE MEANING / ACTION