Filter
Top Products
Operation > 75
Copying
Basic Operation
1. Place your document(s) with text face UP in the ADF or face DOWN on the scanner
glass.
2. If required, press the Copy button (1) on the control panel to prompt the Copy
Ready screen.
3. Press Mono (2) to copy your document(s) in black and white, or Color (3) to copy
your document(s) in color.
Increasing Number of Copies
The machine is preset to a copy count of 1. If you wish to increase the number of copies,
select the number of copies with the numeric keypad.
To increase the number of copies:
1. If required, press the Copy button on the control panel to prompt the Copy Ready
screen.
2. Enter number of copies required using the numeric keypad on the control panel. The
touch screen display will confirm the copy count selected.
NOTE
Copying will only occur when the selected tray (or one of the trays when Tray
Selection is set to “Auto”) is defined as containing PLAIN media type. Refer to
“Paper Setup” on page 32.
NOTE
Factory default setting is Copy mode.
NOTE
If you wish to cancel the copy process, press Stop (4) to abort the operation.
32
1
4