Filter
Top Products
Configuring Your Machine > 46
Print Setup Print Menu Tray
Configuration
Paper Feed:
Tray 1, Tray 2 ,
Tray 3, MPTray
Specifies a feed tray (Tray 2 &
Tray 3 will be displayed when they
are installed.).
Auto Tray Switch:
OFF, ON
Sets the automatic tray switch
function.
Tray Sequence:
Down, Up, Paper
Feed Tray
Specifies selection order priority
for automatic tray selection/
automatic tray switch.
MP Tray Usage:
When Mismatch, Do
Not Use
When Mismatch: If a paper size or
type in a tray is not matched to
that of the print data, use paper
from this tray instead of the
specified tray.
Do Not Use: Makes the MP tray
unavailable in auto tray selection/
switching.
Media Check:
Disable, Enable
Determines whether the machine
checks the size of the media
loaded matches that required for
the document sent to print.
Print Setup Copies:
001 - 999 copies
Enter the number of copies of a
document to be printed from 1 to
999.
Duplex:
ON, OFF
Switches the duplex (2
sided)
function OFF
/ON.
Binding:
Long Edge, Short
Edge
Sets the default binding to LEF or
SEF.
Only available when Duplex is ON.
Resolution:
600dpi,
600x1200dpi,
600dpi M-LEVEL
Sets the default resolution for
printing (dots per inch).
600x1200dpi uses more memory
and requires more time to process,
but prints at a higher quality.
Toner Save Mode:
OFF, ON
Reduces the amount of toner used
for imaging. Toner saving gives
lighter prints but is more
economical.
FEATURE OPTION DESCRIPTION